EXHIBITION POSTER - on coreflute

Students: please  note as discussed in the last tutorial/lecture/presentation 2 weeks ago, the poster template can be downloaded from Moodle (InDesign6) and must be printed on coreflute.
All the best!!

Whoever didn't present their work yesterday...

Please come and see me today to show your work (10% penalty) or Tuesday (30% penalty)

PRESENTATIONS TOMORROW - WED 4 JUNE

Students:
Please come prepared.  There will be 10min-student presentations tomorrow before the class, myself, Eliot and Hank.  This was announced at lecture last week and in studio.  Use either your own laptop or the front computer attached to the projectors.
(Also please bring in your physical works, we'll need to take hi-res images for publication)
Thank you

updated exhibition layout

Students: Please note the updated exhibition layout:

WED 28 MAY - LAST LECTURE | IMPORTANT INFO RE TASKS!!

STUDENTS:  Before you leave tomorrow, please make sure you see Rebekah and Eliot.

All students must show:
1. Resolved GH scripts for the five tasks
2. Post all your images of physical artefacts completed so far (we cannot finish marking and release your marks otherwise, thanks)

All students must attend the following dates:

**** EXHIBITION Bump-In: 18 June AM
**** EXHIBITION Opening: 18 June PM
**** EXHIBITION Bump-Out: 27 June PM

POSTERS
Exhibition Poster template will be available in Moodle. (InDesign6)
- please do not change the format, fonts, etc.
- you'll require 5 rendered images of your tasks:
          *render models in white material and black background as per sample*
- poster to be printed and on foamboard to be placed in front of your stand
- position your images so they highlight particular aspects of your design (as per sample template)

How your exhibition stand should look:

Good luck. All the best!  Have all you questions if any tomorrow!
Thanks all!

IMPORTANT INFO ABOUT GRADES!!!

1. If your name on the right-hand side of this blog doesn't link to your personal BENV2426 blog we can't grade your work.
2. If you don't have a large enough images of your scripts for each assignment (hopefully labelled and grouped neatly) so that we can read all the inputs, outputs and labels we can't grade your work.
3. If you don't have photographic images of each of your physical models posted on your blog, we can't grade them (they're worth 10% each).

Please don't fail this class just because you didn't post your work! Update your blogs NOW because we are grading NOW. If your blog is not linked to you name on this blog, please post a comment here with your name, student number and blog URL.

DFL open times

Tuesday (22/4) 1pm - 5pm
Wednesday (23/4) 1pm - 5pm

// Thursday (24/4) 1pm - 5pm CANCELLED

This weeks DFL times

The DFL is open for students today (Monday) and this Thursday from 1pm-5pm

DFL times

Hi Everyone,
Tomorrow (Tuesday) you will be able to come to the DFL to 3D print between 1pm and 5pm.

Digital Fabrication Lab - Open Hours

Hi Everyone,

Rebekah and I are attending a seminar at Sydney Uni on Tuesday so we will have our Digital Fab Lab open hours on Monday 31/3 from 9:30 - 5:00. I may be at the DFL on Tuesday afternoon if the seminar doesn't go on too long. Apologies for the change of plans.

Eliot

Lecture Video

Hi everyone,

Here is a link to the video recordings of Wednesday morning lectures: Wednesday Lectures 

IMPORTANT!!! - DUE DATES & FABRICATION LAB ACCESS

DUE DATES:

TASK 1 - WED 2 APR
TASK 2 - WED 2 APR
TASK 3 - WED 23 APR
TASK 4 - WED 7 MAY
TASK 5 - WED 21 MAY
TASK 6 - WED 11 JUN

A reminder that student lab access at this stage requires either myself or Eliot to be available for supervision as part of your induction process.

*** Your models for tasks 1 and 2 are due NEXT WEEK 2Apr.
*** Note that at this stage we are only scheduled to supervise until this Friday (see previous post: Important Dates)

*** ANOTHER OPTION: for you is to outsource your lasercutting or 3D printing job elsewhere if you're unable to make use of our availability during the times set out to ensure you're able to submit your models by 2 April.

Bear in mind there could be backlog as 3D printing may take a while, so the earlier the better.  Good luck!

***** Also, please ensure you check this blog regularly as you've been informed that this will serve as our means of communication

Final OH&S training

Hi Everyone,

Can anyone who has not yet done the OH&S training on the laser cutters and 3D printers please reply to this post with your name, student number and days that you are available to do it.

This Weeks Exercise

In this tutorial you will be working on creating a surface with repetitive elements that will respond to one or more attractor points. You will apply a grid to your surface and fit a variable parametric element to the surface that will change depending on each elements distance from the attractor point.

Good luck!

IMPORTANT DATES

OH&S training & EQUIPMENT DEMONSTRATON

14 Mar    FRI       9.30-11.30   (session 3)
17 Mar    MON    9.00-11.00   (session 4)

DIG FAB LAB AVAIL (equipment use under supervision)

17 Mar    MON    12pm - 5.00
18 Mar    TUE      9.00 - 5.00
19 Mar    WED     3.00 - 5.00
20 Mar    THU     9.00 - 5.00

24 Mar    MON    9.00 - 5.00
25 Mar    TUE     9.00 - 5.00
26 Mar    WED    3.00 - 5.00
27 Mar    THU     9.00 - 5.00
28 Mar    FRI       9.00 - 5.00

TASK 1 - DUE DATES

19 Mar    -    Final working GH script and individual blogs
2 Apr     -     Task 1 lasercut model together with Task 2 deliverables